Devices Included in this Data Sheet:
‧ CMD78P451E : EPROM device
‧ CMD78P451 : Mask ROM device
FEATURES
‧ Only 47 single word instructions
‧ All instructions are single cycle except for program branches which are two-cycle
‧ 13-bit wide instructions
‧ 8-bit wide data path
‧ 5-level deep hardware stack
‧ 4K x 13 bits on chip EPROM/ROM
‧ 140 x 8 bits on chip general purpose registers (SRAM)
‧ Operating speed: DC-20 MHz clock input
DC-100 ns instruction cycle
‧ Direct, indirect addressing modes for data accessing
‧ One 8-bit real time clock/counter (Timer0) with 8-bit programmable prescaler
‧ Three 8-bit real time clock/counter (Timer1, Timer2, and Timer3) with period setting
‧ Internal Power-on Reset (POR)
‧ Built-in Low Voltage Detector (LVD) for Brown-out Reset (BOR)
‧ Power-up Reset Timer (PWRT) and Oscillator Start-up Timer(OST)
‧ On chip Watchdog Timer (WDT) with internal oscillator for reliable operation and soft-ware watch-dog
enable/disable control
‧ Five I/O ports (38 I/O pins) with independent direction control
‧ 32 programmable pull-high input pins
‧ 12 wake-up pins
‧ 2 open-drain pins
‧ 2 R-option pins
‧ Clock output with high driving ability
‧ 19 channels of 15-bit resolution Resistor to Frequency Converter (RFC) output
‧ 2 channels of maximum 10-bit resolution Pulse Width Modulation (PWM) output
‧ Built-in 8-bit data comparator
‧ Seven internal interrupt source: Timer0 overflow, Timer1 match, Timer2 match, Timer3 match, SPI module
(Receive & Transmit), RFC module; One external interrupt source: INT pin change
‧ Wake-up from SLEEP by port input change
‧ Power saving SLEEP mode
‧ Programmable Code Protection
‧ Built-in RC oscillator with external resistor
‧ Selectable oscillator options:
- ERC: